Touchscreen Difficulties - Brother MFC-J6510DW User Manual

Network Difficulties (continued)
Difficulty
The network scanning feature does
not work.
The network PC-Fax Receive
feature does not work.
The Brother software cannot be
installed.
Cannot connect to wireless
network.
Reset the network settings.

Touchscreen Difficulties

Difficulty
The dial pad does not work when
entering numbers or characters.
Suggestions
®
(Windows users)
It is necessary to configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, enter the information
below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
(Macintosh users)
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
model list in ControlCenter2.
®
(Windows users only)
It is necessary to set the third-party Security/Firewall Software to allow PC-FAX
Rx. To add port 54926 for Network PC-FAX Rx, enter the information below:
In Name: Enter any description, for example Brother PC-FAX Rx.
In Port number: Enter 54926.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
®
(Windows users)
If the Security Software warning appears on the PC screen during the installation,
change the Security Software settings to permit the Brother product setup
program or other program to run.
(Macintosh users)
If you are using a firewall function of anti-spyware or antivirus security software,
temporarily disable it and then install the Brother software.
Investigate the problem using the WLAN Report.
Press MENU, and then press a or b to display Print Reports. Press
Print Reports. Press a or b to display WLAN Report, and then press
WLAN Report.
For details, see the Network User's Guide.
Press MENU, and then press a or b to display Network. Press Network. Press
a or b to display Network Reset, and then press Network Reset.
For details, see the Network User's Guide.
Suggestions
Use the touchscreen buttons to enter information.
Troubleshooting
B
97