Antitheft Security Slot - NEC MD211G5 User Manual

Attaching a wall mount or multi-display mounting arm
The tilt and swivel stand, as shipped with the display, is interchangeable with commercially available wall mounts or multi-display
mounting arms that:
• Come with a mount plate with 4 slotted screw holes at 100 mm x 100 mm and
• Can bear the total weight of the LCD panel (without the stand) and the cables connected to it.
For more information ask your mounting arm supplier.
Note: Use the original screws to use the LCD panel back on its original tilt stand.
Choose the screw size carefully according to the mount plate thickness.
If the screws are too long, they could damage the internal parts. If they are
too short, the connection becomes loose and the display could fall out.
How to attach wall mounts or multi-display mounting arms
1. Place a soft cloth or cushioning material over a stable even surface.
2. Put the display face down on the soft cloth or cushioning material.
3. Remove 4 screws and detach the tilt and swivel stand shipped with the display.
4. Attach the wall mount or multi-display mounting arm according to the manufacturer's instructions.

Antitheft Security Slot

The display is equipped with the security slot supported by MicroSaver Security Lock System by Kensington Technology Group.
The MicroSaver locks are available at PC supply stores.
Note: Kensington is the registered trademark of Kensington Technology Group.
CAUTION
English-17
Mounting plate thickness Screw size
1.5-4.0mm ISO M4x16