Controls; Osd (On Screen Display) - NEC MD211G5 User Manual

Controls

1 Power Switch
2 LED
3 Front Sensor
4 Ambient Light Sensor
5 + (plus) Button
6 – (minus) Button
7 Main power switch

OSD (On Screen Display)

Operating Hours Since The Last Calibration
Continuous lighting time of the backlight
To turn the monitor on and off.
Indicates that the power is on.
Turns off automatically, when the luminance is stabilized.
For luminance stabilization and calibration.
Measures ambient light during calibration process.
To open the OSD (On Screen Display)
st
1 click – Display information
nd
2 click – Present operating state
3 rd click – DICOM conformance test
th
4 click – OSD off (otherwise OSD disappears in 15 sec.)
Same as + (plus) Button
Main power supply switch.
Model
Serial Number
Maintenance Information
Total Operating Hours
EDID Data Status
Current Luminance
Ambient Light
Current input source
Confi guration Number
Luminance Setting
Gamma Setting
Result of the last test
Luminance status
Display information
Present operating state
DICOM conformance test
English-10