Toshiba e-STUDIO400P Management Manual page 113

2.SETTING ITEMS (ADMIN)
3
Specify the following items as required and press [OK].
ENABLE BINDERY — Press [ENABLE] to enable communicating with the NetWare file server in bindery mode, or
[DISABLE] to disable bindery mode.
ENABLE NDS — Press [ENABLE] to enable communicating with the NetWare file server in NDS mode, or
[DISABLE] to disable NDS mode.
[CONTEXT] — Press this button to enter the NDS context in which the NetWare print server for this equipment is
located. This must be entered when you connect the NetWare file server in NDS mode.
[TREE] — Press this button to enter the NDS tree. This must be entered when you connect the NetWare file server
in NDS mode.
[SEARCH ROOT] — Press this button to enter the NetWare file server name. It is recommended that this be
entered when you connect the NetWare file server in bindery mode.
When you press [CONTEXT], [TREE] and [SEARCH ROOT], the on-screen keyboard is displayed. Enter
the value using the keyboard and digital keys, and press [OK] to set the entry.
You can enable both bindery and NDS modes at the same time.
4
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
Setting Network Functions 111