Toshiba e-STUDIO400P Management Manual page 193

3.MANAGING COUNTERS (COUNTER MENU)
2
Specify the following items as required and press [OK].
For e-STUDIO6530C Series, e-STUDIO4520C Series
For e-STUDIO455 Series, e-STUDIO855 Series
COLOR — Press [ON] to disable color copies/prints for all departments, or [OFF] to permit unlimited color copies/
prints for all departments.
BLACK — Press [ON] to disable black copies/prints for all departments, or [OFF] to permit unlimited black copies/
prints for all departments.
[COLOR] is available only for the e-STUDIO6530C Series and e-STUDIO4520C Series.
For the e-STUDIO6530C Series and e-STUDIO4520C Series, the all limit function for black cannot be set
when the no limit black function is enabled.
The output limitation settings are saved. After you press [OK], the message "WAIT" is displayed until the setting
is applied. This may take some time depending on the number of registered department codes.
3 MANAGING COUNTERS (COUNTER MENU)
Managing Department Codes 191