Table of Contents
Advertisement
o When the minus button (4) is released, the decimal point will
stop flashing and the power level that you have selected will
appear on the cooking zone indicator (6).
o Once the automatic pre-heating time period is over, the hob will
beep once and the decimal point symbol will go out. Only the
actual power level will show on the cooking zone indicator (6).
o The period of time that a zone will automatically pre-heat for
before dropping to the actual power level, is shown in the table
below:-
Increasing the power level during automatic pre-heating
LEVEL
TIME LIMIT
1
1 minute 11 seconds
2
2 minutes 44 seconds
3
4 minutes 47 seconds
4
5 minutes 28 seconds
5
6 minutes 29 seconds
6
1 minutes 11 seconds
7
2 minutes 44 seconds
8
2 minutes 44 seconds
9
N/A
o If a zone is already within automatic pre-
heating mode and you wish to adjust the
power level.
o Increase the power level by pressing the
plus button (5).
o The pre-heating time will be adjusted. It
will take into account the amount of time
that has already elapsed.
18
Advertisement
Table of Contents
