3Com Dual 56K User Manual page 64

64 C 6: C
HAPTER ONFIGURING THE
D 56K LAN M
UAL ODEM FOR
The Private Network Parameters window appears, as shown in Figure 42.
Figure 42 Private Network Parameters Window
10 In the Name field, enter a name for this remote destination, such as the location of
the remote office.
11 In the Dial Out Prefix field, enter the number required by your location to reach an
outside line, if necessary. An example would be dialing "9" for use with a PBX. If
not required, leave this field blank.
12 (Optional) In the Call Waiting Disable Command field, enter the value you
obtained from your telephone company for disabling Call Waiting.
If you have Call Waiting enabled on your line and you do not disable Call Waiting,
then incoming calls may disrupt your modem connection.
The Dial Out Prefix and Call Waiting Disable Command will automatically be
applied to both telephone numbers that you enter below (if you have more than
one number). If you wish to set up one telephone number that does not require a
P N A
RIVATE ETWORK CCESS