3Com Dual 56K User Manual page 78

78 C 7: A
HAPTER DVANCED
Creating a Connection
Script
C
ONFIGURATION
.
Figure 46 Script Configuration Page
You can create a script from any other text editor of your choice and copy and
paste the script directly into the Script Configuration text box. Or you may use the
buttons located along the left side of the script window to guide you through the
scripting process.
Connection Script Command Syntax
The following section explains the valid script command syntax.
The Begin command (
start with .
begin
The Delay command (
sending the next command in the script. The acceptable values are between
1-60 seconds.
The SetPort command (
match the script to the communication port settings of the remote server. The
valid databit is
8
either or .
1 2
The Transmit command (
remote server. An example of a transmit string might be your account
username or password. This text must be included between the quotation
marks. A carriage return is simulated by the characters
marks The maximum length for this string is 64 characters.
.
The WaitFor command (
the script to wait before proceeding. An example of text that you might wait
for is the string
Username
If the timeout period elapses before a matching string is received, the script
) initiates the script. The first line of the script must
begin
designates a length of time to wait before
delay second)
setport databit, parity, stopbit)
or . The valid parity is
7 none
transmit "text string"
waitfor "string, second"
, for which you would send your username as a reply.
allows you to
, , or . The valid stopbit is
even odd
) sends a text string to the
within the quotation
^M
) allows you to designate in