3Com Dual 56K User Manual page 37

The following message appears.
Figure 21 DHCP Message Box
5 Select Yes, unless you know that you will be setting up the LAN Modem for use on
a static network. By selecting Yes, you are setting up the LAN Modem to act as
your DHCP server.
If you will be connecting to a static network, select No.
You are prompted to copy files. You may be prompted to insert your CD ROM.
6 If the necessary files already exist on your hard drive, click Continue. Otherwise
insert the Windows NT 4.0 CD ROM and click Continue.
If you have Remote Access Service (RAS) installed on your PC, after the
appropriate files are copied to your PC, a message box asks whether or not you
would like TCP/IP installed for RAS. If you select Yes, you must select the device
you want to access remotely and then click Close.
7 After the appropriate files are copied to your PC, you will see TCP/IP Protocol listed
in the Network Protocols group box, as shown in Figure 22.
Figure 22 Network Protocols Window
8 Click Close.
The Microsoft TCP/IP Properties window appears, as shown in Figure 23.
Adding TCP/IP to Your Protocols List 37