Oven Control Functions; Setting The Oven Controls - Kenmore 3052 - 24 in. Manual Clean Wall Oven Use And Care Manual

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
BAKE PAD--Used to
select the ba_
function.
Select BROIL PAD--
Used to select the
variable broil function.
f
TIMER SET/OFF PAD-- Used to
set or cancel the minutetimer. The
minute timer does not start or stop
cooking.
UP and DOWN ARROW
PADS-- Used along with
the function pads to select
oven temperature, time of
day and minute timer.
@
@
/
CLOCK SET PAD-- Used
to set the time of day.
STOP/CLEAR-- Used to clear any function
previously entered except the time of day
and minute timer. Push STOP/CLEAR to
stop cooking.
Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates.
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1. Press _.
2. Within 5 seconds, press and hold the A or v until the correct time of day appears in the display.
Changing the Temperature Display Mode
The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven temperatures. Note:
Oven cooking temperatures may be set from 170°F to 500°F (76°C to 260°C).
To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing the
Temperature Display Mode):
1. Press & hold the key pad for 6-8 seconds until F or C appears in the display. Note: At this time the display will show
the current Temperature Display Mode whether set for F or C.
2. Press the/_, key pad once to choose the (Fahrenheit) °F mode; or press the vkey pad once to choose the (Celsius)
°C mode.
3. After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once.
To complete the change skip step 4 below, OR;
4. If at anytime during the process of changing the Temperature Display Mode (For C) you decide the change is not desired,
press the _) key pad before the oven control beeps once to cancel the process.
5. The display will then return to the time of day with any temperature display mode change you may have requested.