Bosch VIP XD Installation And Operating Manual page 42

42 en | Configuration Using a Web Browser
Operating mode
Select an operating mode for the relay.
For example, if you want an alarm-activated lamp to stay on after the alarm ends, select
Bistable. If you wish an alarm-activated siren to sound for ten seconds, for example, select
10 s.
Relay follows
If required, select a specific event that will trigger the relay. The following events are possible
triggers:
–
–
–
–
Relay name
You can assign a name for the relay here. The name is shown on the button next to Trigger
relay.
Trigger relay
Click the button to trigger the relay manually (for testing or to operate a door opener, for
example).
DOC | V4.0 | 2009.06
Off
Relay is not triggered by events
Connection
Trigger whenever a connection is made
Local input 1
Trigger by external alarm input 1
Remote input 1
Trigger by remote station's switching contact 1 (only if a connection exists)
Installation and Operating Manual
VIP XD
Bosch Security Systems