Bosch VIP XD Installation And Operating Manual page 36

Operation manual
Hide thumbs Also See for VIP XD:
Table of Contents

Advertisement

36
en | Configuration Using a Web Browser
NOTICE!
i
Please note that the SSL encryption must be activated and configured at both ends of a
connection. This requires the appropriate certificates to be uploaded onto the VIP XD (see
Section Delete decoder logo, page 50).
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.20 Encryption, page 48).
Auto-connect
Select the On option to automatically re-establish a connection to one of the previously
specified IP addresses after each reboot, after a connection breakdown or after a network
failure.
NOTICE!
i
In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in
mind when assigning the profile to the corresponding sender.
Audio (Audio Version Only)
Select the On option if you wish to additionally transmit a standalone G.711 encoded audio
stream with alarm connections.
Default camera
Here you can select the camera whose image will be automatically displayed first on the
receiver when the alarm connection is made. Depending on the system configuration, you can
then select the other cameras as well.
NOTICE!
i
The numbering follows the labeling of the video inputs on the corresponding sender.
DOC | V4.0 | 2009.06
Installation and Operating Manual
VIP XD
Bosch Security Systems

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vipxda

Table of Contents