Sw&Disp Setup Screen - Panasonic AG-HMC80PJ Operating Instructions Manual

SW&DISP SETUP screen
Display
Item
mode
HANDLE CAMERA
ZOOM PHOTO
IRIS DIAL CAMERA
PHOTO
USER1 SW CAMERA
PHOTO
DV IN
PB
USER2 SW CAMERA
PHOTO
DV IN
PB
USER3 SW CAMERA
PHOTO
DV IN
PB
INDICATOR PB
(AVCHD mode
only)
FOCUS CAMERA
ASSIST SW PHOTO
RING SW CAMERA
PHOTO
Sets the speed allocated to the handle zoom switch.
L/OFF/H:
1 - (low-speed);  - (speed adjustment OFF); 3 - (high-speed)
L/M/H: 1 - (low-speed);  - (medium-speed); 3 - (high-speed)
L/OFF/M: 1 - (low-speed);  - (speed adjustment OFF); 3 - (medium-speed)
Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL
IRIS mode)
DOWN OPEN: The iris opens when the IRIS dial is turned downward.
UP OPEN: The iris opens when the IRIS dial is turned upward.
Selects the function assigned to the USER1 button.
INH:
No function assigned.
(PUSH)AF: Switches to auto focus mode when the button is held during
manual focus mode.
BACKLIGHT: Auto iris control for the backlight compensation. (Pages 1, 61)
SPOTLIGHT: Switches auto iris control for the spotlight on or off.
BLACKFADE: Blackfade (Pages 1, 61)
WHITEFADE: Whitefade (Pages 1, 61)
ATW: Switches the ATW function on or off.
ATW LOCK: Fixes the white balance value when the button is pressed
during ATW. Press again to perform ATW.
HIGH GAIN: The gain mode switches between normal and high with each
press of the button. Gain can be set to up to 34 dB in high gain
mode. This does not work in PHOTO mode. (Pages 6, 55)
D.ZOOM: Changes the ratio of the DIGITAL ZOOM function. Each press
of the button changes the ratio in the following order: OFF (x1)
→ x2 → x5 → x10 → OFF (x1). (Page 39 of Vol.1)
EVF DTL: Emphasizes outlines of images in the viewfinder for easier
focusing when the button is pressed.
SHOT MARK: Shot mark recording (Pages 49, 85)
LAST CLIP: Deletes the last recorded clip. (Pages 14, 63)
WFM: Displays a waveform (only on the viewfinder during CAMERA
mode).
Assigns a function to the USER button.
The setting contents are the same as USER1 SW.
BACKLIGHT
Assigns a function to the USER3 button.
The setting contents are the same as USER1 SW.
SHOT MARK
Selects whether to display the thumbnail indicator.
ON: Displayed
OFF: Not displayed
Assigns a function to the FOCUS ASSIST button.
EXPANDED: Displays the center of the screen in expanded view.
BAR: A bar extends to the right as focus is aligned.
BOTH: Enables both expanded view and focus bar display.
Assigns a function to the RING switch.
ZOOM: Switch between FOCUS and ZOOM.
IRIS: Switch between FOCUS and IRIS.
Description of settings
indicates the factory setting.
107