Panasonic AG-HMC80PJ Operating Instructions Manual page 108

Setup menu list (continued)
SW&DISP SETUP screen (continued)
Display
Item
AUTO SW CAMERA
PHOTO
SMOOTH CAMERA
ZOOM STOP PHOTO
CAM GAIN CAMERA
LIMIT PHOTO
FACE CAMERA
FRAMING PHOTO
ZEBRA CAMERA
DETECT PHOTO
MARKER CAMERA
PHOTO
GUIDE LINES PHOTO
HISTOGRAM PHOTO
SAFETY ZONE CAMERA
REC COUNTER CAMERA
DV IN
108
mode
Sets the face detection function during auto mode to ON or OFF.
A
: Enables face detection.
O N
: Disables face detection.
A
OFF
Selects the method in which zoom operations are stopped.
ON: Smooth stop.
OFF: Precise stop.
Sets the maximum value for camera gain.
CAMERA mode
24 dB: Camera gain can be set to up to 4 dB.
12 dB: Camera gain can be set to up to 1 dB.
PHOTO mode
18 dB: Camera gain can be set to up to 18 dB.
12 dB: Camera gain can be set to up to 1 dB.
Sets the detection frame displays when
OFF: Not displayed.
PRIMARY: Displays only the primary frame.
ALL: Displays all face detection frames.
Selects the brightness level of the left-leaning zebra patterns on the screen.
105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
Select ON to display the marker.
ON OFF
To display the marker, press the ZEBRA button.
Displays guide lines for confirming level shooting.
OFF, ,
• Guide lines are not recorded on images.
• Guide lines do not appear when the face detection function is set to ON.
Displays a graph with the horizontal axis representing brightness, and the vertical
axis representing number of pixels.
You can determine the exposure distribution of an entire image by viewing the
distribution in the graph.
ON OFF
■
Display example
• Adjust the brightness by adjusting the aperture.
Sets SAFETY ZONE.
OFF, 90%, 4:3
Selects counter operation during recording.
TOTAL: The count continues to increase until the RESET button is pressed to
reset it.
CLIP: Resets the counter at start of recording and counts the time of each
recording session.
• Not displayed in PB mode.
Description of settings
A
O N
,
Standard
Dark
is selected in auto mode.
Light
indicates the factory setting.