Tv/Monitor - Panasonic AG-HMC80PJ Operating Instructions Manual

TV/Monitor

Only the output signals from the camera are shown.
LINE MIC LINE MIC
AUDIO
OUT
CH 1
AUDIO
ON IN ON
OFF OFF
MIC+48V MIC+48V
CH 1 CH 2 CH 2
■
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
• Since the component terminal only outputs pictures, an audio cable must be connected at the same time.
(Connect the cable to the audio input terminal of the component terminal input. For details, refer to the
operation manual for the TV.)
• The component terminal of the unit is the BNC type. To connect a pin-type cable, use a pin-BNC
converter plug (optional).
■
Output by COMPONENT OUT, and VIDEO OUT
• Simultaneous output from COMPONENT OUT and VIDEO OUT is not possible. Output is determined by
the terminal selected by the OUTPUT switch.
Connect these cables to the
VIDEO terminals on the television.
OUTPUT
COMPONENT
Y/
VIDEO
P
B
P
R
CAMREMOTE
ZOOM
S/S
FOCUS
IRIS
Video cable (optional)
Audio cable (optional)
TV/Monitor
89