Panasonic AG-HMC80PJ Operating Instructions Manual page 93

User manual
Hide thumbs Also See for AG-HMC80PJ:
Table of Contents

Advertisement

8 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed ("min" indicates
minutes).
Time remaining will be displayed after a brief
pause.
The battery display will change
as battery capacity decreases.
displayed in red when less than 3 minutes
are remaining, and
battery is empty.
Remaining battery capacity may not be
displayed correctly when using in high or
low temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state, and
charge the battery again. (Remaining battery
capacity may still not be displayed correctly if
the battery has been used for long periods in
high or low temperatures, or if the battery has
been recharged a large number of times.)
The remaining battery capacity display is
a guideline and may change according to
usage conditions.
The remaining battery capacity display will
momentarily disappear when switching
between modes, when conducting REC
CHECK operations or when changing the LCD
brightness since the capacity is recalculated at
these times.
Not displayed when using AC adaptor.
9 Media information display
Displays basic information about inserted SD
Memory Card.
: (Flashing)
(White) Playback possible
(Green) Recognizing card
: (Red) Card not inserted
10 Metadata mark
Displayed when the META DATA REC item in
the setting menu RECORD SETUP screen is
set to ON. (Page 104)
11 Quality display
Displays the image quality during PHOTO mode.
*
Will not be output to external devices.
1
will be
will flash when the
12 DV control device status display (DV mode
only)
Displays status of devices connected to the DV
terminal.
DV
: Recording
DV
: (Green) Recording standby
DV
: Device cannot be controlled
DV:
Device is not connected
DV ---: Device cannot record and go on
recording standby
13 DV IN PRESET display (DV mode only)
Displayed when set to 1394 TC preset mode.
(Page 73)
14 Recording pixel display
Displays the recording pixels during PHOTO mode.
15 DV mode display (DV MODE only)
Displayed when DV mode is selected with the
MODE switch.
16 Recording format display (Page 103)
17 Frame rate display
Displays recording frame rate.
Not displayed when set to 60i.
18 Shutter speed display
The shutter speed is displayed here.
19 Recording aspect display (DV mode only)
(Page 103)
*
20 Focus bar display
1
Displayed when the FOCUS ASSIST SW item
in the setting menu SW&DISP SETUP screen
is set to BAR.
21 Time stamp display (Page 103)
22 Face detection frame display
Displayed when the FACE FRAMING item in
the setting menu SW&DISP SETUP screen is
set to PRIMARY or ALL, and FACE DETECT
ON is enabled.
23 Optical Image Stabilizer
Displayed when Optical Image Stabilizer is ON.
24 Digital zoom ratio display
Displays digital zoom ratio.
D X:  x zoom
D 5X: 5 x zoom
D 10X: 10 x zoom
(Continued on the next page)
display
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aghmc80Avccam ag-hmc80p

Table of Contents