Other Functions Screen - Panasonic AG-HMC80PJ Operating Instructions Manual

Setup menu list (continued)

OTHER FUNCTIONS screen

Display
Item
CARD CAMERA
FORMAT PHOTO
DV IN
PB
CARD STATUS PB
(AVCHD mode
only)
IR REMOTE CAMERA
PHOTO
DV IN
PB
DV CONTROL CAMERA
(DV mode
only)
DV CMD SEL CAMERA
(DV mode
only)
REC LAMP CAMERA
PHOTO
BEEP SOUND CAMERA
PHOTO
DV IN
PB
CLOCK SET CAMERA
PHOTO
DV IN
PB
*
AVCHD mode only
1
110
mode
Formats the SD Memory Card.
YES: Formats the card.
NO
*
• Formatting a card will delete all data recorded in AVCHD mode and DV mode.
1
Displays the SD Memory Card status.
YES: Displays the card status.
NO
Sets the operations of the supplied remote control unit.
ON: Accepts commands from the remote control.
OFF: Operations are not accepted from remote control.
Selects the control method by this camera when a digital device is connected to
the DV terminal and backup images are recorded.
OFF: Not controlling any external device.
EXT: Controls external devices with the START/STOP button.
BOTH: Simultaneously records with this camera and an external device.
CHAIN: The external device starts recording automatically when this camera's
recording memory has nearly run out.
Sets the recording operation of the external device when the START/STOP
button is pressed.
REC_P: Switches between record and pause.
STOP: Switches between record and stop.
Sets lighting of the tally lamp.
FRONT: Lights the front side tally lamp.
REAR: Lights the rear side tally lamp.
BOTH: Lights both tally lamps.
OFF: Tally lamp lighting is turned off.
Turns the beep sound ON or OFF.
ON OFF
If the SD Memory Card becomes FULL while ON is selected, the beep sound is
output.
When the beep is sounded, the audio signals from the output connector are
muted before the beep sound is output.
Sets the camera-recorder's calendar.
YES NO
Description of settings
indicates the factory setting.