Panasonic AG-HMC80PJ Operating Instructions Manual page 94

Screen displays (continued)
25 AWB information display
Displays the information of white balance.
ATW:
LOCK:
P3.K/P5.6K:
Ach/Bch:
26 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
Displayed when the LENS STATUS item in the
setting menu SW&DISP SETUP screen is set
to ON.
27 Histogram display
Displayed in PHOTO mode when the
HISTOGRAM item in the setting menu
SW&DISP SETUP screen is set to ON.
28 Focus frame display (Page 31)
29 Shot mark recording display
(SHOT MARK)
Displayed when you press a USER button
to which the SHOT MARK function has been
assigned.
INVALID will be displayed if an index or shot
mark cannot be attached.
30 Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0 % to 99 %. "99%↑" appears if the
percentage is over 99.
Marker display:
During shooting, pressing the ZEBRA button
once or twice will display the marker.
*
Will not be displayed when the face detection function is set to ON in the auto mode, unless FACE
1
FRAMING is set to OFF.
*
Will not be output to external devices.

94
When ATW is set
When ATW is locked
In the case of preset
In the case of A/B
*
1
31 Focus control information display
Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual
focus mode, MF appears. When the focus control is
set to a macro range, the black and white of AF or
MF are displayed in reverse.
95 (Focusing distance: infinity)
:
00 (Focusing distance: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled.
Also, depending on the zoom position, the
lower limit value of macro range may be
different. Displayed when the LENS STATUS
item in the setting menu SW&DISP SETUP
screen is set to ON.
• When using a macro range for the focus
control, zooming may cause the image to
become unfocused.
32 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
Displayed when the LENS STATUS item in the
setting menu SW&DISP SETUP screen is set
to ON.
33 Function menu display (Page 41 of Vol.1)
34 Audio level meter display
35 Date and time display
Month:
JAN (January), FEB (February),
MAR (March), APR (April), MAY (May),
JUN (June), JUL (July), AUG (August),
SEP (September), OCT (October),
NOV (November), DEC (December)
mmm dd yyyy hh:mm:ss
• When the time stamp function is ON, the
month display is switched from numbers to
words.
*
2
*
2
*
2
Day of the month
Year:
2010 - 2036
Hours
Minutes
Seconds