Table of Contents
Advertisement
Installation
Choosing the best location
For best results:
• the base should be the only item
plugged into the wall outlet
• the antenna should be fully
extended
• the base should be centrally
located, away from electrical
equipment such as computers,
refrigerators, fluorescent lights,
stereos, etc.
• locate the base on an upper floor
• the handset should be kept as
close to normal room
temperature as possible
Connecting the telephone
Caution: For eye safety, do not
extend the antenna until installation
is complete.
1. Plug the AC adaptor into a 120 V
AC outlet and insert the small
plug into the DC 12 V jack
the back of the base (see
(page 30)).
Note:
The AC outlet should not
be controlled by a switch
or connected to a power
bar.
2. Plug one end of the telephone
cord into a telephone wall jack
and the other end into the jack
on the back of the base.
3. To keep the cords from being
pulled out, route the cords in the
channel under the base.
on
5
Advertisement
Table of Contents
