[915] Caller ID Checksum
Enables or disables selection of the checksum mode. Normally, it should not be necessary to change the
default setting.
9
1
5
Feature Manual References
1.1.28 Call Waiting Caller ID
1.1.30 Caller ID
[963] Call Forwarding Selection
Enables the PBX to forward the calls received on outside (CO) lines programmed as "Normal" in [414-416]
CO Line Mode—Day/Night/Lunch. If this program is disabled, outside (CO) line calls cannot be forwarded
even if the extension user has set the FWD feature.
9
6
3
NEXT
Conditions
•
This program also functions for outside (CO) line calls via the DISA Intercept Routing feature, and
when DISA calls are received by a DISA ring group.
Programming Manual References
[414-416] CO Line Mode—Day/Night/Lunch
Feature Manual References
1.1.11 Call Forwarding (FWD)—All Calls
1.1.12 Call Forwarding (FWD)—Busy/No Answer
1.1.13 Call Forwarding (FWD)—Follow Me
[966] TRS Check after Answering
Specifies whether the PBX checks DTMF signals when answering calls or not.
9
6
6
NEXT
SELECT
STORE
( Enable/Disable)
NEXT
extension jack no.
(01 ... 24/
)
NEXT
SELECT
STORE
(Enable/ Disable)
2.2 PT Programming—Procedures
END
or
PREV
To continue
SELECT
STORE
(Enable/
To continue
Disable)
SELECT
END
END
Programming Manual
77