Panasonic KX-TA82483 - Expansion Cards Programming Manual page 143

Programming Manual References
[109] CO Indicator
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
Proprietary Telephone—KX-T7700 Series Incoming Lamp Control
Enables the Message/Ringer Lamp on the KX-T7700 series telephones for the following incoming calls:
– Incoming call from an outside (CO) line with Caller ID information
– Incoming call from another extension to a busy extension when the called extension has set Call
Waiting (Call Waiting Tone 1)
– Incoming call from a doorphone when an optional doorphone or doorbell/door chime is connected
to the PBX
Default
Off
Value Range
On (checked), Off (unchecked)
Programming Manual References
[968] KX-T7700 Series Incoming Lamp Control
Feature Manual References
1.1.82 Message Waiting
1.1.83 Message Waiting for Another Extension
Single Line Telephone—Hold Mode
Selects how calls are held and transferred with a single line telephone (SLT) when the Recall/hookswitch is
pressed for less than 1000 ms.
Default
Hold-1
Value Range
Hold-1, Hold-2, Hold-3
Programming Manual References
[104] SLT Hold Mode
Feature Manual References
1.1.15 Call Hold
Conference—Conference Tone
Enables the PBX to send a confirmation tone before starting or ending a conference call established by the
Conference feature or Executive Busy Override feature.
9.1 System [1]
Programming Manual 143