Panasonic KX-TA82483 - Expansion Cards Programming Manual page 104

6.4 Profile Editor
The parameters are as follows:
Parameter
Port
Baud Rate (bps)
Word Length
Stop Bit
Parity Bit
When connecting the KX-TA Maintenance Console to the PBX using an RS-232C cable, assign the following
values to the Serial Interface (RS-232C) port of the PBX:
Baud Rate (bps): 9600
Word Length: 8 bits
Parity Bit: None
Stop Bit: 1 bit
Connection parameters for Modem
104 Programming Manual
Values
COMx
9600
8 bits
1 bit
None
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports will be displayed.
Displays the speed of data transmission. This
value cannot be changed.
Displays the number of bits in a word. This
value cannot be changed.
Displays the length of the stop, used to identify
the end of a transmitted group of bits. This
value cannot be changed.
Displays the kind of parity error-checking used.
This value cannot be changed.