Panasonic KX-TA82483 - Expansion Cards Programming Manual page 223

SLT Ring—Ring / Silence Ratio
Selects the ratio between the bell signals of an SLT (a set of bell-on and bell-off).
Default
1:3
Value Range
1:2, 1:3, 1:4
Programming Manual References
[142] SLT Ring/Silence Ratio
Feature Manual References
1.1.108 Ring Tone Pattern Selection
SLT Ring—Bell-on Time
Selects the length of the bell-on signal of an SLT. When combined with the ratio selected in the SLT Ring—
Ring / Silence Ratio list, this determines the ring tone pattern for incoming calls to SLTs. When DTMF is
selected in the SLT Caller ID—Type list, this also determines the maximum number of digits of an SLT
Caller ID number.
Default
1300 ms
Value Range
1000–2000 ms in 100 ms increments
Programming Manual References
[143] SLT Ring Bell-on Time
Feature Manual References
1.1.30 Caller ID
1.1.108 Ring Tone Pattern Selection
SLT Caller ID—Type
Selects the signaling type of SLT Caller ID.
Default
FSK (During Ring)
Value Range
FSK (During Ring), FSK (RP-AS), DTMF (Immediate), DTMF (During Ring)
Programming Manual References
[150] SLT Caller ID Signaling Type
9.9 Caller ID [9]
Programming Manual 223