Viewing Sas Topology - Asus DSEB-DG SAS User Manual

5.6.5

Viewing SAS topology

From the Adapter Properties screen, select SAS Topology.
1.
LSI Logic Config Utility
Adapter Properties -- SAS1068
Esc = Exit Menu
Enter = Select Item -/+ = Change Item
Press <Alt+D> to display device properties, or <Alt+M> to display more keys.
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press
2. Information about the volume and its member-disks are then displayed.
LSI Logic Config Utility
SAS Topology -- SAS1068
SAS1068105:03:001
﹂ Enclosure
﹂
﹂ IS VOL
Esc=Exit
Alt+D=Device Properties
5-60
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
Device Identifier
Direct Attach Devices
Bay 0 RAID Physical Disk
Bay 1 SEAGATE ST373454SS
Bay 2 RAID Physical Disk
Bay 3 RAID Physical Disk
LSILOGICLogical Volume 3000
F1=Help
Alt+N=More Keys
v6.16.00.00 (2007.05.07)
SAS1068
00
05.03.00
1.15.00.00-IR
500E0180:60831008
25.02
Disabled
0
(Enabled BIOS & OS)
v6.16.00.00 (2007.05.07)
Device
Info
Controller
SAS
0003 SAS
SAS
SAS
Chapter 5: RAID configuration
turns off)