Asus DSEB-DG SAS User Manual page 133

Using the Objects command
To check data consistency using the Objects command:
From the Management Menu, select Objects, then select Logical Drive
1.
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then press
<Enter>.
Select Check Consistency from the pop-up menu, then press <Enter>.
3.
When prompted, use the arrow keys to select Yes from the dialog box to
4.
check the drive.
5. When checking is complete, press any key to continue.
ASUS DSEB-DG Seriies 5-27