Creating A Raid 0 Set (Stripe) - Asus DSEB-DG SAS User Manual

5.3.1

Creating a RAID 0 set (Stripe)

To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
[ ↑↓ ]-Select
2. Enter a name for the RAID 0 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select RAID 0 (Stripe),
3.
then press <Enter>.
Highlight the Disks item, then press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
5. Use the up/down arrow key to highlight a drive, then press <Spacebar>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
5-32
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
and cannot contain special characters.
[ESC]-Exit
Port Drive Model
0 XXXXXX XXXXXX
1 XXXXXX XXXXXX
2 XXXXXX XXXXXX
3 XXXXXX XXXXXX
Select 2 to 4 disks to use in creating the volume.
[ ↑↓ ]-Previous/Next [SPACE]-Selects
CREATE ARRAY MENU
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ENTER]-Select Menu
[ SELECT DISKS ]
Serial # Size
XX.XGB
XX.XGB
XX.XGB
XX.XGB
[ENTER]-Selection Complete
]
]
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: RAID configuration