Creating A Raid 0 Or Raid 1 Set - Asus DSEB-DG SAS User Manual

Menu
Configure
Initialize
Objects
Rebuild
Check Consistency Allows you to check the data consistency of the logical drives of a
5.2.1

Creating a RAID 0 or RAID 1 set

The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0
or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign the
set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
From the utility main menu, highlight Configure, then press <Enter>.
1.
Use the arrow keys to select Easy Configuration, then press <Enter>.
2.
ASUS DSEB-DG Series
Description
Allows you to create RAID 0 or RAID 1 set using the Easy
Configuration or the New Configuration command. This menu also
allows you to view, add, or clear RAID configurations or select the
boot drive
Allows you to initialize the logical drives of a created RAID set
Allows you to initialize logical drives or change the logical drive
parameters
Allows you to rebuild failed drives
created RAID set
5-5