Creating A Raid 1 Set (Mirror) - Asus DSEB-DG SAS User Manual

5.3.2

Creating a RAID 1 set (Mirror)

To create a RAID 1 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
2. Enter a name for the RAID 1 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select RAID 1 (Mirror),
3.
then press <Enter>.
4. Follow steps 4 to 5 and 7 to 9 of the previous section to create the RAID 1
set.
5-34
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
and cannot contain special characters.
[ ↑↓ ]-Select [ESC]-Exit
CREATE ARRAY MENU
Volume1
RAID1(Mirror)
Select Disks
N/A
0.0 GB
Create Volume
[ENTER]-Select Menu
]
]
Chapter 5: RAID configuration