Initializing The Logical Drives - Asus DSEB-DG SAS User Manual
Dseb-dg series
Hide thumbs
Also See for DSEB-DG SAS:
- User manual (206 pages) ,
- Approved vendor list (2 pages) ,
- Hardware manual (2 pages)
Table of Contents
Advertisement
5.2.4
Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may
initialize the logical drives of a RAID set(s) using the Initialize or Objects
command on the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
From the Management Menu, highlight Initialize, then press <Enter>.
1.
2.
The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Use the arrow keys to select the logical drive from
the Logical Drive selection, then press <Enter>.
5-18
Chapter 5: RAID configuration
Advertisement
Table of Contents
