Table of Contents
Advertisement
Deleting an array
•
•
To delete an array
1.
From the Manage Array screen, select Delete Array, then press
<Enter>.
LSI Logic Config Utility
Manage Array -- SAS1068
Identifier
Type
Scan Order
Size (MB)
Status
Manage Hot Spare
Synchronize Array
Activate Array
Delete Array
Esc = Exit Menu
Enter = Select Item
2.
Press <Y> to activate, or <N> to cancel.
Viewing SAS topology
1.
From the Adapter Properties screen, select SAS Topology.
LSI Logic Config Utility
Adapter Properties -- SAS1068
Esc = Exit Menu
Enter = Select Item
5-30
You cannot recover lost data if you delete an array. Make sure you
back up important data before deleting an array.
If you delete an IM (RAID 1) volume, the data is preserved on the
primary disk.
F1/Shift+1 = Help
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
-/+ = Change Item
v6.08.05.00 (2006.08.02)
LSILOGIC Logical Volume 3000
IME
0
51498
Optimal
v6.08.05.00 (2006.08.02)
SAS1068
00
05.03.00
1.15.00.00-IR
500E0180:60831008
25.02
Disabled
0
(Enabled OS only)
Chapter 5: RAID configuration
Advertisement
Table of Contents
