Creating A Raid 1 Set (Mirror) - Asus NCL-D User Manual

5.4.4 5.4.4 5.4.4

Creating a RAID 1 set (Mirror)

Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
5.4.4 5.4.4 Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1. Follow steps 1 to 2 of the C r e a t i n g a R A I D 0 s e t
R A I D - 1 ( F a u l t T o l e r a n c e ) R A I D - 1 ( F a u l t T o l e r a n c e )
2. Select R A I D - 1 ( F a u l t T o l e r a n c e ) R A I D - 1 ( F a u l t T o l e r a n c e )from the S e l e c t R A I D T y p e R A I D - 1 ( F a u l t T o l e r a n c e )
menu, then press <Enter>.
Refer to the M i r r o r i n g R e q u i r e m e n t s
screen to determine the number of hard disk drives required for the
selected RAID type.
3. Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An X X X X X mark appears after the selected HDD.
4. Follow step 3 to select the other members of the RAID set, then press
<Enter> when finished.
A S U S N C L - D E S e r i e s A S U S N C L - D E S e r i e s
A S U S N C L - D E S e r i e s A S U S N C L - D E S e r i e s A S U S N C L - D E S e r i e s
C r e a t i n g a R A I D 0 s e t C r e a t i n g a R A I D 0 s e t
C r e a t i n g a R A I D 0 s e t section. C r e a t i n g a R A I D 0 s e t
M i r r o r i n g R e q u i r e m e n t s note at the bottom of the M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s
S e l e c t R A I D T y p e S e l e c t R A I D T y p e
S e l e c t R A I D T y p e S e l e c t R A I D T y p e
5 - 3 3 5 - 3 3
5 - 3 3 5 - 3 3 5 - 3 3