Wiring Connections; Cable Lengths - Honeywell HEGS5300 User Manual

2.4

WIRING CONNECTIONS

RJ11 Socket on rear of keyboard
2.5

CABLE LENGTHS

Refer to the following illustrations for examples of wiring connections.
NOTE: The HEGS5300 CCTV Keyboard is supplied with a standard 7-foot flat telephone
Example 1
7-FOOT FLAT TELEPHONE CABLE
(PROVIDED WITH HEGS5300)
HEGS5300
KEYBOARD
Rev. A
Pin 1 – Power GND
Pin 2 – TX Data
Pin 3 – Signal GND
Pin 4 – RX Data
Pin 5 – N/C
Pin 6 – 12Vdc
RJ11 Socket on Keyboard
Pin 6
Pin 1
cable. It is strongly recommended that twisted-pair data cable is used from the
RJ11 Termination Box when long cable lengths are required to eliminate any
data problems. Any cable length in excess of RS232 standards (50 feet)
requires line driver units (model number PTE102).
POWER PROVIDED FOR CONTROLLER ON PORTS 3 & 4
NOTE: ONLY PORT 4 ON MINIMAX UNITS
RJ11 Socket on rear of HMXAT200
Pin 6 – Power GND
Pin 5 – RX Data
Pin 4 – Signal GND
Pin 3 – TX Data
Pin 2 – N/C
Pin 1 – 12Vdc
RJ Leads for Connecting Keyboards
HMXAT200 SYSTEM
CONTROLLER
6 MXMU000933
07/07/04