System; System Configuration - Honeywell HRDP4F250 User Manual

Setup

System

System Configuration

______________________________________________________________________________________________
26
SYSTEM CONFIGUR ATION
VIDEO FORMAT
LANGUAGE
DVR ID
DATE FORMAT
DATE
TIME
TIME ZONE
USE DST
NTP
KEYPAD BEEP
AUTO LOG OFF
To enter System Configuration, press SETUP on the front of the DVR and press
ENTER to select System Configuration. Use the arrow buttons on the front
panel of the DVR or the remote control to navigate the display. Select SAVE
and press ENTER to update settings.
VIDEO FORMAT – NTSC / PAL.
LANGUAGE – ENGLISH (Default) [User Selectable].
SYSTEM ID – Required for the operation of multiple units using the supplied IR
remote control. Each system must have a unique ID to function properly.
DATE FORMAT – US (MM-DD-YYYY) / EURO (DD-MM-YYYY) / ASIA (YYYY-
MM-DD) – [User Selectable].
DATE – Press ENTER to select the Date and use the number keys and/or arrow
buttons to set the date. Press ENTER again to deselect.
TIME – Press ENTER to select the Time and use the number keys and/or arrow
buttons to set the time. Press ENTER again to deselect.
TIME ZONE – Press ENTER to open the Time Zone window. Use the arrow
keys to navigate the list and press ENTER to make selection. Select Exit and
press ENTER to close the window.
Note The date and time must be set manually; changing the time zone will
not automatically change the Time/Date display.
NTSC
ENGLISH
0
MM-DD-YYYY
11/06/2006
10:44:48
GMT-08:00..
OFF
OFF
OFF
OFF
SAVE CANCEL