Access Remote Connection; Connecting Multiple Dvrs - Honeywell HRDP4F250 User Manual

Access Remote Connection

Connecting Multiple DVRs

______________________________________________________________________________________________
Document 800-02471 Rev A
02/09
Open the Remote Software.
1.
2. Click on the icon of the server as defined previously.
Enter the user name and password of an authorized remote user as
3.
defined in the System > User Configuration > Client menu on the DVR.
Note User Name and Password are both case sensitive.
Click Connect.
4.
Connect up to 4 Performance Series DVRs to the Remote Software to easily
switch between DVRs.
Configure all DVR connections as described above in Configuring a
1.
Remote PC.
2. After connecting to the first DVR, click CONNECT on the Display screen to
open the Local Setup window.
3. Select a second pre-configured DVR and click Connect.
4. Use the drop-down menu in the lower left corner of the display screen to
switch between the connected DVRs.
Performance Series DVR User Guide
65