Honeywell HRDP4F250 User Manual page 8

Warnings and Safeguards
Notes on Cleaning
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to
wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the
surface of the DVR.
If using a chemical saturated cloth to clean the unit, follow that product's instructions.
Notes on Maintenance
This DVR is designed to last for long periods of time. To keep the DVR always operational we
recommend regular inspection maintenance (cleaning parts or replacement). For details contact the
nearest dealer.
Notes on Moisture Condensation
Moisture condensation could damage the DVR. Read the following information carefully.
Moisture condensation might occur under the following circumstances:
• When this product is brought directly from a cool location to a warm location.
• When this product is moved to a hot and humid location from a cool location.
• When this product is moved to a cool and humid location from a warm location.
• When this product is used in a room where the temperature fluctuates.
• When this product is used near an air-conditioning unit vent.
• When this product is used in a humid place.
Do not use the DVR when moisture condensation may occur.
If the DVR is used in such a situation, it may damage discs and internal parts. Remove any CD discs,
connect the power cord of the DVR to the wall outlet, turn on the DVR, and leave it for two to three hours.
After two to three hours, the DVR will warm up and evaporate any moisture. Keep the DVR connected to
the wall outlet and moisture will seldom occur.
______________________________________________________________________________________________
8