Overwrite; Check - Honeywell HRDP4F250 User Manual

Overwrite

Check

______________________________________________________________________________________________
Document 800-02471 Rev A
02/09
Sets options for overwriting data when the Hard Disk Drive becomes full.
DISK CONFIGUR ATION
HDD OVERWRITE
DISK-FULL WARNING
REMAIN TIME
USED SPACE
DISK-FULL ALARM
DISK-FULL BUZZER
DISK FULL MESSAGE
FORMAT
Enable HDD OVERWRITE to allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is full. If set to OFF the DVR
will not record any new data once the HDD becomes full.
Enable DISK FULL WARNING for notification when the HDD becomes full and
HDD Overwrite is disabled.
Checks the HDD for errors or failure.
Performance Series DVR User Guide
ENABLE
ON
30 MIN
90%
0
OFF
OFF
OVERWRITE CHECK
SAVE CANCEL
OVERWRITE
SMART
29