Table of Contents
Advertisement
Diagnostics - Debug tab
A-61848 / TWAIN October 2016
The Debug tab allows you to turn on options that allow support
personnel to diagnose any issues you may encounter with using your
scanner. It is suggested that you only make changes on this tab when
instructed by Technical Support.
NOTES:
• All of the options on this tab apply to all Setting Shortcuts, not just the
currently selected Setting Shortcut.
• In order for any changes on this tab to take effect, you must restart
your application.
Logging — saves the communications between the scanner and a
scanning application. The options are: Off, On or Custom.
Images
• Received From Scanner: saves the images received at the PC from
the scanner.
• Sent To Application: saves the images received at the scanning
application from the scanner.
Simulation — allows you to use the TWAIN Datasource without using
the actual scanner.
• Model: allows you to select the specific scanner model to simulate.
• Flatbed: allows you to select which flatbed accessory to simulate.
• Flags: if supported by your TWAIN Datasource, this will contain a list
of accessories your simulated scanner has installed.
85
Advertisement
Table of Contents
