Leds; Data Cassettes; Media Life; Led Display Codes - HP Model 705 - Workstation User Manual

LEDs

The front panel has two colored LEDs: the Tape Light and the Clean/Attention Light. The
Tape Light flashes green to show activity (loading, unloading, reading, and writing).
Steady green means a cartridge is loaded.
The Clean/Attention Light flashes amber to indicate head cleaning is needed or a
cartridge is near the end of its life. Steady amber means a hard fault.
Tape Clean/ Meaning
Light Attention
Activity – load or unload
Activity – read or write
Cartridge loaded
Any
Cleaning needed
Any
Fault

Data Cassettes

Media Life

HP DDS data cassettes are currently specified to 2000 passes over any part of the tape
under optimal environmental conditions (50% relative humidity, 22 degrees C). During a
tape operation, any one area of the tape may have multiple passes over the heads, this
translates into approximately 200 to 300 backups or restores.
Under certain conditions, the life of your data cassette is less than 200 to 300 backups or
restores. Replace your data cassettes after 100 backups or restores if your operating
conditions meet any of the following criteria:
Table 2–1. LED Display Codes
Using Your DDS Drive
Key
OFF
Steady Green
Steady Amber
Flashing Green
1/2 sec on, 1/2 sec off
Flashing Amber
1/2 sec on, 1/2 sec off
Fast Flash Green
1/4 sec on, 1/4 sec off
2–3