HP Model 705 - Workstation User Manual page 39

A screen similar to the following appears:
H/W Path
====================================
1.0.0
2.0.1
2.0.1.3.0
2.0.2
2.0.3
2.0.4
2.0.5
2.0.6
2.0.7
2.0.7.6.0
Look under the H/W Path heading for device paths beginning with the sequence 2.0.1.
The sequence 2.0.1 denotes a single-ended SCSI controller. The number following 2.0.1
is the address setting for a single-ended device on that controller. For example, the listing
2.0.1.3.0 in the sample device list tells us that there is a single-ended device currently
using address 3.
If you are using HP-UX 10.X, enter the following at the prompt:
/usr/sbin/ioscan -d scsitape
After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The
list appears similar to the following:
Troubleshooting and Removal/Replacement Procedures
Description Status
graphics ok(0x577)
scsi ok(0x7071)
tape_drive ok(0x1800202)
lan ok(0x7072)
hil ok(0x7073)
serial ok(0x7075)
serial ok(0x7075)
parallel ok(0x7074)
scsi ok(0x707c)
disk ok(0x101)
RETURN
3–3