Preparing The System - HP Model 705 - Workstation User Manual

Preparing the System

Perform the following steps to prepare the system for the CD-ROM drive installation:
1.
Determine the existing SCSI address settings currently in use on your system.
Before installing the drive, determine which SCSI ID address settings are already
being used on your system by completing the following steps:
2.
If you are using HP-UX 9.x, enter the following at the prompt:
If you are using HP-UX 10.x, enter the following at the prompt:
After a few moments the ioscan utility lists all of the SCSI I/O devices it could find.
/etc/ioscan –d scsi
RETURN
/usr/sbin/ioscan –d sdisk
Introduction
RETURN
1–9