HP Model 705 - Workstation User Manual page 23

Table 1–1. Single-Ended SCSI Bus Configuration Constraints (per bus)
Single-Ended SCSI Devices
Hard Disk Drives
Floppy Disk Drives
CD-ROM Drives
4-mm DDS Tape Drives
9-Track Tape Drives
650-MB Magneto-Optical Drives
Magneto-Optical Autochangers (see NOTICE below)
8-mm Cartridge Tape Subsystem
8 Serial Port Terminal Server
Maximum Number of SCSI Devices (per bus)
NOTICE: Magneto-Optical Autochangers use more than one SCSI
drive address. Each address must be accounted for in the
maximum number of SCSI devices allowed.
Introduction
Maximum Number of Each
Type of Device Allowed
7
1
1
2
2
1
1
2
1
7
1–13