Configuring Your Operating System - HP p1543b Installation Manual

Installing the Slim CD-RW Drive
5 Fit the two guide pins into the holes in the drive, then push on
guide pins
6 Slide the drive tray back into the PC until it clicks into place.
7 Attach the data, power and audio cables.
8 Replace the PC's cover (refer to your PC documentation).

Configuring Your Operating System

The detection of the CD-RW drive, the configuration of the
operating system, and the loading of the drivers is, in most cases,
automatic. Once you have physically installed the CD-RW drive in
your computer, all you have to do is turn on the PC and use the new
drive for reading CDs. In order to write to CDs, you must first install
the CD recording software on the CD-ROM provided with this
product.
NOTE In Windows 98, Windows 2000, Windows XP and Windows NT 4.0,
there are no special icons for CD-RW Drives. The drive is identified
in the same way as a standard CD-ROM drive and uses the same icon.
If your system does not recognize the CD-RW drive (for example,
there is no CD-ROM icon in the Windows Explorer), you might need
to enable the drive in your PC's Setup program. Restart the
computer and press F2 when Setup=F2 appears.
6 English
the top of the drive until the drive is securely held in place by the
retaining clip.