Download  Print this page

Powering Off The Workstation And Any Peripherals - HP Model 705 - Workstation User Manual

Hp 12x speed cd-rom disk drive user's guide (a1658-90703)
Hide thumbs


Table of Contents

Powering Off the Workstation and any Peripherals

To power off the workstation and any peripherals, perform the following steps:
Power off the workstation, using the power switch on the front of the workstation.
CAUTION: Do not power off your workstation without first shutting down
HP-UX. Powering off with HP-UX still running could damage the
data on the disks associated with your workstation.
If you are already at the boot-administration level (the level used to check the SCSI IDs),
you do not need to shut down before powering off.
If you accidentally rebooted HP-UX while determining the address settings, see
"Preparing the System," earlier in this chapter, for instructions on shutting down HP-UX.
Disconnect the power cord from the rear of the workstation and the wall outlet.
Power off any external peripherals attached to your workstation, and unplug their
power cables from the wall outlet.
You are now ready to begin the hardware installation of your new CD-ROM drive. The
step-by-step instructions for installing the drive are found in the System's Owners Guide.


Table of Contents

  Also See for HP Model 705 - Workstation

  Related Manuals for HP Model 705 - Workstation