Maytag MGR5775QDW - 30 Inch Gas Range Use And Care Manual page 23

Oven Door
oven door, This could cause the range to tip over, break
the door, 0r k_Jure the user.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and wiil decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass=
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Leveling Legs
[eye!!ng legs to the f!oor. This bracket prevents the range
from accidentally tipping.
Emectrical Connection
Appliances which require electrical power
are equipped with a three=prong
grounding plug which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outieL
A/ways disconnect power to appliance before servicing,
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
Oven Light
o Disconnect power to range before replacing light bulb,
, Allow oven to cool before replacing I!ght bulb.
- Make sure bulb cover and bulb are cool before touching,
To replace oven light bulb:
1. When oven is cool, hold bulb cover BuLB oovE_
in place, then slide wire retainer
off cover. NOTE: Bulb cover
wiil fail if not held in place
while removing wire retainer. (
\
2. Remove bulb cover and light
RETAINER
bulb.
3. Replace with a 40-watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
22