Changing Licensing Mode (Standard Edition Only); Removing Licenses In Per-Server Mode; Installing Microsoft Internet Information Service - HP ML310 - ProLiant - G2 User Manual

Click Install to install the currently selected components. The HP Management Agents install using the
5.
password you have set.
For more information about the HP Management Agents, refer to the HP Insight Management Agents User
Guide (http://h18013.www1.hp.com/products/servers/management/agents/documentation.html).

Changing licensing mode (Standard Edition only)

To change the server licensing mode from per-device or per-user to per-server:
Start license logging services:
1.
Click Start, and select All Programs>Administrative Tools>Services.
a.
Right-click License Logging, and then select Properties.
b.
Select Manual at the Startup type field.
c.
Click OK.
d.
Click Start, and select Control Panel.
2.
Double-click Licensing. The Choose Licensing Mode window appears.
3.
Click Per Server. Select Microsoft® Windows® Server from the dropdown product list.
4.
Click Add Licenses. The New Client Access License window appears.
5.
Enter the quantity of additional CALs that have been purchased.
6.
Click OK. The Per Server Licensing window appears.
7.
If you agree to the terms of the license agreement, select the I agree that checkbox, and then click
8.
OK to continue.
Click OK to exit the Choose Licensing Mode window.
9.

Removing licenses in per-server mode

Click Start, and select Control Panel.
1.
Double-click Licensing. The Choose Licensing Mode window appears.
2.
Click Remove Licenses. The Select Certificate to Remove Licenses window appears.
3.
Enter the quantity of CALs to remove in the Number of Licenses to Remove field, and then click
4.
Remove.
Click Yes at the License System window.
5.
Click Close>OK to exit the Choose Licensing Mode window.
6.

Installing Microsoft Internet Information Service

IMPORTANT:
installation of networking components, such as Microsoft® Internet Information Service and
Active Directory.
Click Start, and select Control Panel.
1.
Double-click Add or Remove Programs.
2.
The server must be connected to an active network connection to complete the
Post-installation tasks 15