HP ML310 - ProLiant - G2 User Manual page 40

40 HP ProLiant ML310 Generation 2 Server User Guide
4. Prepare the heatsink for installation:
5. Install the heatsink fan assembly.
6. Tighten the four heatsink retaining screws.
CAUTION: To prevent possible server malfunction or damage
to the equipment, be sure to completely close the processor locking
lever.
a. If reusing the heatsink, clean the bottom of the heatsink with the
provided alcohol pad then apply a thin layer of thermal grease to the top
of the processor.
NOTE: HP recommends ShinEtsu G751 thermal grease compound for
this server.
b. If installing a new heatsink, remove the protective covering.