Non-Hot-Plug Sata Hard Drive - HP ML310 - ProLiant - G2 User Manual
Generation 2 server
Hide thumbs
Also See for ML310 - ProLiant - G2:
- Setup and installation manual (170 pages) ,
- User manual (123 pages) ,
- Maintenance and service manual (90 pages)
Table of Contents
Advertisement
44
HP ProLiant ML310 Generation 2 Server User Guide
Non-Hot-Plug SATA Hard Drive
To remove the component:
1. Power down the server.
2. Remove the access panel ("Removing the Access Panel" on page 22).
3. Disconnect the power and data cables from the rear of the hard drive.
4. Remove the drive cage from the chassis.
5. Remove the six Torx screws that secure the drive cage to the chassis.
Advertisement
Table of Contents
