HP ML310 - ProLiant - G2 User Manual page 34

34 HP ProLiant ML310 Generation 2 Server User Guide
1. Connect peripheral devices to the server.
Item
1
2
3
4
5
6
7
8
2. Connect the power cord to the back of the server.
WARNING: To reduce the risk of electric shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into RJ-45 connectors.
IMPORTANT: If the RILOE II board is installed in the server, be sure
that you attach the video cable to the video connector on the rear of the
RILOE II board. The standard video connector on the server rear panel
is not used when the RILOE II board is installed. For more information,
refer to the HP Remote Insight Lights-Out Edition II User Guide.
Description
Power cord connector
Mouse connector
Keyboard connector
Serial connector
Video connector
USB connectors (2)
RJ-45 Ethernet connector
Parallel connector