Table of Contents
Advertisement
1.
Put your fingers on the pocket on the right side of the printer, unlock
the scanner cover, and remove it upward.
2.
Put your fingers on the tab marked "Pull Open," and pull down the
scanner unit.
Note:
When pulling down the scanner unit, avoid knocking it against the table or
anything else to protect it from an excessive impact.
3.
Lightly wipe the glass shown in the
picture with a soft, dry cloth.
CAUTION:
Do not use synthetic detergent, benzine,
water, or other liquid for cleaning. Doing so
may result in a stain.
When the glass of the scanner is smeared
with oil, grease or other unremovable
substance, wipe it with a cloth lightly
dipped in alcohol. When cleaning, never
apply any liquid directly to the glass of the scanner.
4.
Press the section marked "Close" indicated by the circle in the picture
below; then push in the scanner unit until it clicks in place.
➁
➀
English
TM-J9000/J9100 17
Advertisement
Table of Contents
