Epson J9100 - TM Two-color Inkjet Printer User Manual page 11

User manual
Table of Contents

Advertisement

WARNING :
If a machine failure has occurred while
the included power switch cover is
attached, unplug the power cable
immediately. Continued use may result
in a fire hazard.
The power switch cover is intended to
prevent the power switch from being
pressed accidentally. To use the cover,
place it over the power switch. When
turning on or off of the switch is
required, insert a pointed object into
one of the holes of the cover, and press
the switch.
When the printer is stored or not in use for an extended period, turn off the
power switch and disconnect the power cord.
Installing and Replacing the Ink Cartridge
CAUTION:
Keep the ink cartridges out of the reach of children. Do not drink the ink.
Do not disassemble or refill ink cartridges.
Do not store ink cartridges in high or freezing temperatures.
Do not remove the ink cartridge except when replacing it or preparing the
printer for shipment.
Before using the cartridge, you must remove the yellow tape or printing will
not be possible.
For good printing quality, do not remove the ink cartridge from its clear
plastic packing until immediately before its installation. Use up the cartridge
within six months after unpacking it.
Use up the ink cartridge by the date indicated on the cartridge box or the
ink cartridge itself.
Do not puncture the convex part of the bottom of the ink cartridge or
remove the transparent film on the bottom of the ink cartridge; otherwise
ink may leak.
A used cartridge may have some ink on the convex part of the bottom of
the cartridge. Avoid touching that part to keep your hands clean.
Seiko Epson recommends using genuine EPSON cartridges for your printer.
Products of other manufacturers may cause damages that are not
covered by EPSON's warranties.
English
TM-J9000/J9100 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-j9000Tm-j9100

Table of Contents